Sold out
Digimatic Offset Centerline Caliper 10-2000mm, 0.01mm Resolution, ±0.03mm, NTD10P-20PMX
$839.00
$797.05
{"without_tax":{"formatted":"$797.05","value":797.05,"currency":"USD"},"tax_label":"Tax","rrp_without_tax":{"formatted":"$839.00","value":839,"currency":"USD"},"saved":{"formatted":"$41.95","value":41.95,"currency":"USD"}}
(You save
5.00%
)
SKU:
573-606-20
Lead Time (Days):
0
Weight:
1.000000 LBS
- Specially designed for center to center distance measurements on the same and offset planes
- Can also measure from edge to center
- Supplied in fitted plastic case
MITUTOYO UPC CODE: 603908618546
PRIMARY SUPPLIER EAN: 4946368726786
COUNTRY OF ORIGIN: JAPAN
HARM_CODE: 9017.30.4037
ECCN NUMBER: EAR99
HAZARDOUS: N1
SHIPPING LENGTH: 13 SHIPPING WIDTH: 6 SHIPPING HEIGHT: 2 SHIPPING WEIGHT: 1 Series No.: 573 MECH/DIGI: Digimatic IND. OR SET: Individual
Range: 10 - 200mm PRIM. MEAS. RANGE LOWER MM: 10 mm PRIM. MEAS. RANGE UPPER MM: 200 mm RESORGRAD. MM: 0.01mm ACCURACY MM: 0.03mm IP RATING: 67 OUTPUT: SPC
Related Products
SKU: 573-605-20
Digimatic Offset Centerline Caliper 10-150mm, 0.01mm Resolution, ±0.03mm, NTD10P-15PMX
Specially designed for center to center distance measurements on the same and offset planesCan also measure from edge to centerSupplied in fitted plastic caseMITUTOYO UPC CODE: 603908620501PRIMARY...
$756.00
$718.20
SKU: 573-642-20
Digimatic Knife-Edge Caliper, 10-200mm, 0.01mm Resolution, ±0.05mm Accuracy, NTD14-20PMX
Specially designed for inside measurements in hard-to-reach placesWith SPC OutputSupplied in fitted plastic caseMITUTOYO UPC CODE: 603908616603PRIMARY SUPPLIER EAN: 4946368726915COUNTRY OF ORIGIN:...
$1,180.00
$1,121.00
SKU: 573-651-20
Digimatic Neck Caliper, 0-150mm, 0.01mm Resolution, ±0.03mm, NTD15-15PMX
Point-jaw type can measure wall thickness inside bores and recessesFlat-jaw type can measure grooves and recessesWith SPC data outputMITUTOYO UPC CODE: 603908625216PRIMARY SUPPLIER EAN:...
$866.00
$822.70
SKU: 573-679-20
Digimatic Scribing Caliper, 0-300mm, 0.01mm Resolution, ±0.03mm Accuracy, NTD22-30PKX
The carbide-tipped jaws facilitate fine scribing on workpieceWith depth bar.With SPC data outputMITUTOYO UPC CODE: 603908700005PRIMARY SUPPLIER EAN: 4946368846392COUNTRY OF ORIGIN: JAPANHARM_CODE:...
$1,190.00
$1,130.50
SKU: 573-652-20
Digimatic Point Jaw Type Caliper, 0-150mm, 0.01mm Resolution, ±0.03mm, NTD15-15PMX
Point-jaw type can measure wall thickness inside bores and recessesFlat-jaw type can measure grooves and recessesWith SPC data outputMITUTOYO UPC CODE: 603908620518PRIMARY SUPPLIER EAN:...
$1,040.00
$988.00