Sold out
Digimatic Neck Caliper, 0-150mm, 0.01mm Resolution, ±0.03mm, NTD15-15PMX
$866.00
$822.70
{"without_tax":{"formatted":"$822.70","value":822.7,"currency":"USD"},"tax_label":"Tax","rrp_without_tax":{"formatted":"$866.00","value":866,"currency":"USD"},"saved":{"formatted":"$43.30","value":43.3,"currency":"USD"}}
(You save
5.00%
)
SKU:
573-651-20
Lead Time (Days):
0
Weight:
1.000000 LBS
- Point-jaw type can measure wall thickness inside bores and recesses
- Flat-jaw type can measure grooves and recesses
- With SPC data output
MITUTOYO UPC CODE: 603908625216
PRIMARY SUPPLIER EAN: 4946368727004
COUNTRY OF ORIGIN: JAPAN
HARM_CODE: 9017.30.4048
ECCN NUMBER: EAR99
HAZARDOUS: N1
SHIPPING LENGTH: 13 SHIPPING WIDTH: 6 SHIPPING HEIGHT: 2 SHIPPING WEIGHT: 1 Series No.: 573 MECH/DIGI: Digimatic IND. OR SET: Individual
Range: 0 - 150mm PRIM. MEAS. RANGE LOWER MM: 0 mm PRIM. MEAS. RANGE UPPER MM: 150 mm RESORGRAD. MM: 0.01mm ACCURACY MM: 0.03mm IP RATING: 67 OUTPUT: SPC
Related Products
SKU: 573-652-20
Digimatic Point Jaw Type Caliper, 0-150mm, 0.01mm Resolution, ±0.03mm, NTD15-15PMX
Point-jaw type can measure wall thickness inside bores and recessesFlat-jaw type can measure grooves and recessesWith SPC data outputMITUTOYO UPC CODE: 603908620518PRIMARY SUPPLIER EAN:...
$1,040.00
$988.00
SKU: 573-605-20
Digimatic Offset Centerline Caliper 10-150mm, 0.01mm Resolution, ±0.03mm, NTD10P-15PMX
Specially designed for center to center distance measurements on the same and offset planesCan also measure from edge to centerSupplied in fitted plastic caseMITUTOYO UPC CODE: 603908620501PRIMARY...
$756.00
$718.20
SKU: 573-621-20
Digimatic Point Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD12-15PMX
Narrow tip jaws fit into very small groovesWith depth barSupplied in fitted plastic casaeMITUTOYO UPC CODE: 603908627166PRIMARY SUPPLIER EAN: 4946368726823COUNTRY OF ORIGIN: JAPANHARM_CODE: 9017.30...
$527.00
$500.65
SKU: 573-625-20
Digimatic Point Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD12P-15PMX
Narrow tip jaws fit into very small groovesWith depth barSupplied in fitted plastic caseMITUTOYO UPC CODE: 603908628224PRIMARY SUPPLIER EAN: 4946368726854COUNTRY OF ORIGIN: JAPANHARM_CODE: 9017.30...
$656.00
$623.20
SKU: 573-634-20
Digimatic Blade-Type Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD13-15PMX
Thin-blade type jaws fit into very small grooves and making previously difficult outside measurements easier to obtainThe OD measuring faces are carbide-tippedWith depth barMITUTOYO UPC CODE:...
$747.00
$709.65