Labels

Label for equipment that contains ESDSIdentifies equipment that when opened has ESD sensitive (ESDS) items that are susceptible to ESD damage 3"  core, 500 labels per roll   RoHS 2, REACH and Conflict Minerals compliant Made in the United States of...

Dissipative Label* DispenserHelps peel away backing from label. Volume Resistance - Rv 1 x 106 to < 1 x 109 ohms per ANSI/ESD STM11.12 Designed for used in an ESD Protected Area. Place on a grounded ESD work surface to ground. Made in the United States...

3.25 Inch Width x 3.75 Inch HeightJEDEC (JEP113-B) Moisture Sensitive Caution LabelUsed on Statshield® Foil Moisture Barrier Bags to identify moisture sensitive devices for levels 2, 2a, 3, 4, 5, and 5a as defined by J-STD-020.Permanent AdhesiveFor...

Identifies devices that are less than 250 volts HBM 2" x 2" , 500/roll, permanent adhesive   RoHS 2, REACH and Conflict Minerals compliant Made in the United States of America This item is made and stocked in Canton, MA. ANSI/ESD S20.20 program deals...

2 Inch x 2 Inch ESD Susceptibility Symbol (RS-471)Identifies the contents of the packaging as ESD susceptible. Reusable AdhesiveNon-binding adhesive will allow the label to be removed and leaving little or no residue. 3 Inch Core. 500 per Roll Made in...

3"  core, 500 labels per roll   RoHS 2, REACH and Conflict Minerals compliant Made in the United States of AmericaThis item is made and stocked in Canton, MA ESDS assemblies and equipment containing ESDS parts and assemblies should be marked with an...

2 Inch x 2 Inch ESD Susceptibility Symbol (RS-471)Identifies the contents of the packaging as ESD susceptible. Tamper Evident AdhesiveLabel will tear when removed to indicate that the package has been opened. 3 Inch Core. 500 per Roll Made in the United...

1 Inch x 1 Inch ESD Protective Symbol LabelIdentifies that the labeled item as ESD protected Permanent AdhesiveFor one-time use when the label will remain intact and never be removed 3 Inch Core. 1000 per Roll RoHS 2, REACH and Conflict Minerals...

1.5 Inch x 2 Inch Compliance Verification Certification LabelIdentifies that the labeled item has been tested to be used as part of an ESD Control Plan Permanent AdhesiveFor one-time use when the label will remain intact and never be removed 3 Inch Core...

1 Inch x 2 Inch ESD Control Item Tested Label per ESD TR53Identifies that the labeled item has been tested to be used as part of an ESD Control Plan Permanent AdhesiveFor one-time use when the label will remain intact and never be removed 3 Inch Core...