Sold out
Digimatic Blade-Type Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD13-15PMX
$747.00
$709.65
{"without_tax":{"formatted":"$709.65","value":709.65,"currency":"USD"},"tax_label":"Tax","rrp_without_tax":{"formatted":"$747.00","value":747,"currency":"USD"},"saved":{"formatted":"$37.35","value":37.35,"currency":"USD"}}
(You save
5.00%
)
SKU:
573-634-20
Lead Time (Days):
0
Weight:
1.000000 LBS
- Thin-blade type jaws fit into very small grooves and making previously difficult outside measurements easier to obtain
- The OD measuring faces are carbide-tipped
- With depth bar
MITUTOYO UPC CODE: 603908616566
PRIMARY SUPPLIER EAN: 4946368726885
COUNTRY OF ORIGIN: JAPAN
HARM_CODE: 9017.30.4045
ECCN NUMBER: EAR99
HAZARDOUS: N1
SHIPPING LENGTH: 13.5 SHIPPING WIDTH: 6 SHIPPING HEIGHT: 2 SHIPPING WEIGHT: 1 Series No.: 573 MECH/DIGI: Digimatic IND. OR SET: Individual
Range: 0 - 150mm PRIM. MEAS. RANGE LOWER MM: 0 mm PRIM. MEAS. RANGE UPPER MM: 150 mm RESORGRAD. MM: 0.01mm ACCURACY MM: 0.02mm IP RATING: 67 OUTPUT: SPC
Related Products
SKU: 573-625-20
Digimatic Point Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD12P-15PMX
Narrow tip jaws fit into very small groovesWith depth barSupplied in fitted plastic caseMITUTOYO UPC CODE: 603908628224PRIMARY SUPPLIER EAN: 4946368726854COUNTRY OF ORIGIN: JAPANHARM_CODE: 9017.30...
$656.00
$623.20
SKU: 573-621-20
Digimatic Point Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD12-15PMX
Narrow tip jaws fit into very small groovesWith depth barSupplied in fitted plastic casaeMITUTOYO UPC CODE: 603908627166PRIMARY SUPPLIER EAN: 4946368726823COUNTRY OF ORIGIN: JAPANHARM_CODE: 9017.30...
$527.00
$500.65
SKU: 573-676-20
Digimatic Scribing Caliper, 0-150mm, 0.01mm Resolution, ±0.02mm Accuracy, NTD22-15PKX
The carbide-tipped jaws facilitate fine scribing on workpieceWith depth bar.With SPC data outputMITUTOYO UPC CODE: 603908648604PRIMARY SUPPLIER EAN: 4946368727080COUNTRY OF ORIGIN: JAPANHARM_CODE:...
$430.00
$408.50
SKU: 573-651-20
Digimatic Neck Caliper, 0-150mm, 0.01mm Resolution, ±0.03mm, NTD15-15PMX
Point-jaw type can measure wall thickness inside bores and recessesFlat-jaw type can measure grooves and recessesWith SPC data outputMITUTOYO UPC CODE: 603908625216PRIMARY SUPPLIER EAN:...
$866.00
$822.70
SKU: 573-652-20
Digimatic Point Jaw Type Caliper, 0-150mm, 0.01mm Resolution, ±0.03mm, NTD15-15PMX
Point-jaw type can measure wall thickness inside bores and recessesFlat-jaw type can measure grooves and recessesWith SPC data outputMITUTOYO UPC CODE: 603908620518PRIMARY SUPPLIER EAN:...
$1,040.00
$988.00