Single-Port 10/100/1000Mbps Ultra PoE Splitter - 12V/19V/24V

Quick and Easy Gigabit High Power PoE Network Deployment PoE PTZ Speed Dome Other Network devices that need higher PoE power to work normally Thin-client AIO(All-in-One) touch PC Remote digital signage display The POE-171S frees the device deployment from restrictions due to power outlet locations, which eliminates the costs for additional AC wiring and reduces the installation time.

50 watts of Power over 4-Pair UTP The POE-171S and POE-171 ultra PoE solution use cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP - be it End-span (Pin 1,2,3 and 6) or Mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 50 watts of power by using all the fthis pairs of standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.

Cost-effective and Easy Cabling Installation In the IEEE 802.3at Gigabit high Power over Ethernet devices installed, the system administrator only has to connect one single RJ-45 Ethernet cable to carry both power and data from an IEEE 802.3at/af PoE injector to POE-171S, and then the POE-171S splits data and DC power to any of IP networking devices. Besides, to connect through IEEE 802.3at Power over Ethernet injector and POE-171S, you can also have the benefits of cost saving, easy networking planning and higher reliability. Upon the completion of the installation of IEEE 802.3at compliant devices, the POE-171S, when functioning with the POE-171, can make the connection while migrating or splitting the power and the Ethernet digital packets, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other Network devices that need 50-watt high power to work normally.

Features

• All-in-one compact size design
• RJ-45 interfaces, 1-Port Data + Power input, 1-Port Data output 1-Port DC output power socket and 1 DC 12V/19V/24V DIP switch
• Splits the 56V DC power over RJ-45 Ethernet cable into DC 12V/19V/24V output
• IEEE 802.3at/af PoE standard compliant, compatible with All IEEE 802.3at/af Powered Devices
• Supports 56VDC, 50pwatt PoE power output

Application

• PoE PTZ Speed Dome
• Remote digital signage display
• Thin-client
• AIO (All-in-One) touch PC
• Other Network devices that need higher PoE power to work normally

Downloads:

• User Manual