Sold out
Depth gage attachment, height gage accessory with metric-type holding bar (9x9mm cross-section)
$156.00
$148.20
{"without_tax":{"formatted":"$148.20","value":148.2,"currency":"USD"},"tax_label":"Tax","rrp_without_tax":{"formatted":"$156.00","value":156,"currency":"USD"},"saved":{"formatted":"$7.80","value":7.8,"currency":"USD"}}
(You save
5.00%
)
SKU:
901997
Lead Time (Days):
0
Weight:
0.500000 LBS
- Attached to a height gage to measure groove and hole depth.
- Uses standard dial indicator points
MITUTOYO UPC CODE: 603908183419
PRIMARY SUPPLIER EAN: 4946368199504
COUNTRY OF ORIGIN: JAPAN
HARM_CODE: 9031.90.9195
ECCN NUMBER: EAR99
HAZARDOUS: N1
SHIPPING LENGTH: 5 SHIPPING WIDTH: 3 SHIPPING HEIGHT: 2 SHIPPING WEIGHT: 0.5 Series No.: 506 MECH/DIGI: Mechanical IND. OR SET: Individual
Related Products
SKU: 900878
.217 In Minimum Diameter, 2.95 In Maximum Reach, Height Gage Depth Gage Attachment, With Inch Type Hold Bar
Attached to a height gage to measure groove and hole depth.Maximum distance from the bottom of the holding bar to the contact point is 2.95 In.Maximum distance from the bottom of the holding bar to...
$64.88
$61.64
SKU: 900581
Center Master, height gage accessory with inch type hold bar, .04-1.5 In/ 1-38mm Diameter
Allows quick measurement of center-to-center distance between holes.Measurable hole diameters: .40 In to 1.50 InMeasurable hole diameters: .40 In to 1.50 InMITUTOYO UPC CODE: 603908180319PRIMARY...
$290.00
$275.50
SKU: 514-103
HEIGHT GAGE
Zero reference point can be adjusted.Satin chrome-finished scales for glare-free reading.Extra-large base for rigidity.MITUTOYO UPC CODE: 603908128151PRIMARY SUPPLIER EAN: 4946368096230COUNTRY OF...
$1,030.00
$978.50
SKU: 900367
Extension Base, Accessory for Depth Gage, For Depth Gages with Ranges below 0-24 In/0-600mm only, 7 In
Extends the span of the base by attaching to the base plate of depth gageMITUTOYO UPC CODE: 603908179863PRIMARY SUPPLIER EAN: 4946368199191COUNTRY OF ORIGIN: JAPANHARM_CODE: 9017.90.0140ECCN NUMBER:...
$57.26
$54.40
SKU: 570-248
DIGIMATIC HEIGHT GAGE 40 In
Built-in absolute linear encoderCarbide-tipped scriber is provided.MITUTOYO UPC CODE: 603908273325PRIMARY SUPPLIER EAN: 4946368212814COUNTRY OF ORIGIN: JAPANHARM_CODE: 9031.80.8085ECCN NUMBER:...
$4,920.00
$4,674.00