Desco

220V cord, Euro specs Downloads:

8ʹ Power Cord with IEC C-13 Connector and NEMA 5-15P PlugWorks with standard electrical systems in North America and Japan Compatible with the Following Items: High Output Benchtop Ionizer

220V cord, UK/Asia specs   Downloads:

6’ Power Cord with IEC C5 Connector and NEMA 5-15P PlugWorks with standard electrical systems in North America and Japan Compatible with the Following Item: 19321 Full-Time Continuous Monito

6’ Power Cord with IEC C5 Connector and Type G PlugWorks with standard electrical systems in Asia and the UK Compatible with the Following Item: 19322 Full-Time Continuous Monitor

Relay Controlled Power Strip (2 Normally Off, 1 Normally On, 1 Always On) Controls power to workbenches, hand tools, and other electronic devices dependent on the Full-Time Continuous Monitor’s...

Metal Expansion Wristband and Coil CordCreates a path-to-ground for an operator with resistance <3.5 x 107 ohms per the required limits of ANSI/ESD S20.20, tested per ANSI/ESD S1.1 or ESD TR53...

Controller for EMIT’s Air Assisted and Non-Air Assisted Pulsed Ion Bar Provides power and allows operator to adjust to optimal settings for the connected ion bars. Period and Duty Cycle...

Pronged 10 mm Socket Snap Kit for the Desco Mini Monitor Increases the electrical contact area with worksurface mats that use a thin conductive layer/ground plane Made in the United States of...

Pronged 10mm socket snapIdeal for multi-layer mats with a conductive inner layer Push and clinch installationEasy to use; secure installation Common Point Ground Symbol LabelUsed to indicate the...

Pronged 10mm stud snapIdeal for multi-layer mats with a conductive inner layer Push and clinch installationEasy to use; secure installation Common Point Ground Symbol LabelUsed to indicate the...

Accessory item for the Desco 19325 Full-Time Continuous Monitor Use to control electronic door locks, lights, buzzers, etc. Relay will activate when a failure is caught by the Full-Time Continuous...