Desco

Dissipative (1 x 105 < 1 x 108 ohms) Thunderon® FibersElectrically bonds through grounded operator and produces no charge generation preventing ESD events. Protective Carrier YarnProtects the...

Replacement Ground Cord To be used with the Combo Tester X3 6 ft. Length with Ring Terminal and Banana Plug Terminations Connects the Combo Tester X3 to equipment ground Made in the United States of...

Replacement Ground Cord To be used with the 19494 Portable Charged Plate Monitor Made in Japan This item is stocked in Chino, CA Downloads: Portable Charged Plate Monitor Operation and...

Banana Jack (0.162” - 0.164” ± 0.002” ID) Outlet Adapter Converts a standard outlet into a groundable point for wrist straps and other grounding hardware with banana plugs. Made in The United States...

Disposable Foot Grounder Provides a path-to-ground and will not generate a charge* Highly Visible Yellow Polyester FabricIdentifies the wearer as properly grounded. Non-Marring MaterialWill not...

Flush-to-the-Surface Ground for Static Dissipative Laminate such as Micastat®Makes a direct connection with the conductive grounding layer of the laminate Made in The United States of AmericaThis...

Flush-to-the-Surface Ground for Static Dissipative Laminate such as Micastat®Makes a direct connection with the conductive grounding layer of the laminate Made in The United States of AmericaThis...

Two banana jacksProvides two grounding points for wrist straps or carts Ring terminal at end of ground cordAllows easy attachment to electrical ground Mounts under the front edge of workstationSaves...

Wrist strap parking station on unit*Allows operator to hang wrist strap when leaving workstation Two banana jacksProvides two grounding points for wrist straps or carts Ring terminal at end of...

Common point ground system for benches with laminate topsIncludes one 10 ft (3.0m) grounding wire with one megohm resistor and ring terminal, and one grounding bolt assembly with single wrist strap...

Handheld Electrode AccessoryMeets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents Compatible with the Following Desco Surface Resistance Meters: 19290 Digital...

Stretch Fit Heel GrounderConverts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge.* Tab to Cup Resistance: 1 x 106 to < 1 x 107 ohms at 100 voltsMeets...