Continuous Monitors

Accessory for the 19651 and 19652 Multi-Mount MonitorsLocate in the field of view of the operator and/or supervisors for alarm notification Continuous Visual AlarmMirrors the behavior of the LEDs on the Multi-Mount Monitor Made in the United States of...

Single Workstation Continuous MonitorContinuously monitors the path-to-ground integrity of one operator and one ESD worksurface IMPROVED Operator AlarmAlarms when the operator unintentionally disconnects from the monitor or the connection between the...

Single Workstation Continuous MonitorContinuously monitors the path-to-ground integrity of one operator and one ESD worksurface IMPROVED Operator AlarmAlarms when the operator unintentionally disconnects from the monitor or the connection between the...

Pronged 10 mm Socket Snap Kit for the Desco Mini Monitor Increases the electrical contact area with worksurface mats that use a thin conductive layer/ground plane Made in the United States of America This item is made and stocked in Chino,...

Ring Magnets Mounts the monitor in areas without a worksurface Made in the United States of America This item is  stocked in Chino, CA Downloads: Mini Monitor: Installation, Operation and Maintenance

Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface NEW Illuminated Enclosure¹ Makes the status of the operator and worksurface highly visible to the operator and...

Replacement Power Relay Interface Cord To be used with the 19333 Power Relay Assembled in the United States of America with Globally Sourced Materials This item is stocked in Chino, CA Downloads: Full-Time Continuous Monitor Installation, Operation...

Relay Controlled Power Strip (2 Normally Off, 1 Normally On, 1 Always On) Controls power to workbenches, hand tools, and other electronic devices dependent on the Full-Time Continuous Monitor’s status 3 kV Optical Isolation, Relay Hysteresis, and...

Accessory for the 19330 and 19331 Full-Time Continuous Monitors Locate in the operator’s and/or supervisor’s field-of-view for alarm notification Visual Indicator  Mirrors the behavior of the LEDs on the Full-Time Continuous Monitor Assembled in the...

Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface, and the electrical ground used to by the monitor. NEW Monitored Ground Terminal Provides a verified ground point for mats,...

3 ft. Extension Cord for the 19258, 19260, 19657, and 19658 Power AdaptersCompatible with the power adapters packaged with the Mini Monitor, Multi-Mount Monitor, and Dual Operator Monitor Imported This item is stocked in Chino, CA Downloads: Mini...

Brass Machined Hex Block with Six Banana Jacks and Six Screws for #8 Ring Terminals Grounding points for wrist straps, ground cords, tools and other items. Connect to other grounding hubs1 for additional grounding points. Mounting Hardware Included Hand...