Smock, Statshield, Labcoat, XLarge Knitted Cuffs, White, (Built To Order Only)

• Groundable Static Control Garment System Tested Per ANSI/ESD S20.20-2014 (Rtg < 3.5 X 10⁷ ohms) Requirements, per ANSI/ESD STM2.1
  Allows operators and smock to be bonded or electrically connected to ground to prevent ESD events in ESD Protected Areas.
• Hip-To-Cuff Grounding
  Grounds operator with no need for a cord to be attached to the operator's wrist.
• Minimum Of 9% Carbon Conductive Nylon Fibers Woven In Chain-Link Design
  Provides continuous and consistent charge dissipation throughout lifetime of smock.
• Creates Faraday Cage Effect Around Torso And Arms Of Operator
  Shields ESD charges from operators’ clothing from damaging ESD sensitive devices.
• Panel To Panel Conductivity
  Prevents isolated charged conductor in ESD Protected Area.
• 2-Year/100 Launderings Limited Warranty – Click HERE For Test Results
• Extended lifetime of garment will maintain its electrical and ESD properties.
• To See In-Use Picture Of Desco’s Hip-To-Cuff, Click Here

• Made In The United States of America
  This item is made and stocked in Miami, FL.
  
  Click Here For Smock Sizes
  
  What the ESD Association says about ESD Garments
  
  Per ESD Handbook TR 20.20 paragraph 5.3.13.3.1.3 Garment Construction “The electrical integrity of the seams is critical and should be verified by electrical continuity measurements between all panels of the garment (ESD STM 2. 1).” To test ESD Smock, see Desco 19780 Surface Resistance Test Kit 

Downloads:

• Video
• ESD Statshield® Protective Smocks Grounding, Testing and Maintenance