• Shock Cord Full Coverage Foot Grounder
  Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge.¹
• Elastic Shock Cord Attachment System²
  Stretches over shoes for a comfortable fit with most styles and sizes of shoes. See sizing chart 
• Replaceable Conductive 8-Strand Nylon Polyester Grounding Tab
  Improves hygiene and provides reliable connection with operator’s sweat-layer.
• Walking Voltage Generation <60 Volts Tested per ANSI/ESD STM97.2
  Meets the ANSI/ESD S20.20 requirement for use as an ESD footwear component in personnel grounding flooring/footwear system.
• Tab to Cup Resistance: 1 x 10⁶ to < 1 x 10⁷ ohms at 100 volts
  Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 as suitable ESD footwear component in personnel grounding flooring/footwear system.
• Contact Points on Ball and Heel Area
  Remains in contact with the floor (path-to-ground) through a normal walking motion and in situations where both heels may be off the ground.
• Non-Marring Material
  Will not leave marks on floors (or operator’s shoes); reducing maintenance costs of touching up on floors.
• Made in the United States of America
  This item is made and stocked in Miami, FL

1. Foot grounders must be used with an ESD floor (<1 x 10⁹ ohms) to create a path-to-ground and minimize charge generation.
2. U.S. Patent 12,041,708

Downloads:

• Video
• Shock Cord Foot Grounder