ICP DAS RS232 to CAN Protocol Converter

CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network via the I-7530 converter. The I-7530 is designed to unleash the power of CAN bus via RS-232 communication protocol. It accurately converts messages between CAN and RS-232 networks.

This module lets you communicate with CAN devices easily from any PC or devices with an RS-232 interface. As an authorized ICP DAS reseller, we can bid on RFQ's for any ICP DAS part numbers even if they are not found on this website. Contact your L-com Sales Representative to request a non-obligatory quote.

Features.

• 2500 Vrms isolation on CAN port; 4 kV ESD protection on CAN port
• Support Auto-Response mode and Polling mode; Support arbitration mechanism to avoid collision; Support error detection and error correction on CAN bus
• Support baud rate 125 kbps, 250 kbps and 500 kbps
• Support up to 255 nodes on the CAN network
• NXP TJA1042 CAN transceiver; Follow CiA CAN 2.0B specification

.

Application

• Building Automation
• Control System
• Distributed data acquisition
• Factory Automation

Downloads:

• User Manual