Combo Tester X3, Tester Only (Built To Order Only)

• NEW Compatibility with ESD Glove Test Fixture
  Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
• Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms, Footwear limits 750 kilohms to 35 megohms*
  Determines that operator’s personal grounding device** is functioning correctly
• Simultaneous Testing in Up to 3 Seconds
  Reduces time spent testing personal grounding devices used in ESD Control Plans
• Solid State Touch Test Button with No Moving Parts
  Maintains accuracy of tests and extends the lifetime of the tester
• 30 Volt Test Signal
  Provides accurate tests that are not humidity dependent
• Relay for Use with Automatic Doors Or Other Locking Systems
  Controls access to ESD Protected Areas
• Calibration Unit Available for Accurate Performance And Conformity Testing In The Field
  See Desco Item 50424
• NIST Calibrated – Original Calibration Certificate can be Downloaded Here
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
• Made in the United States of America
  This item is made and stocked in Chino, CA
  
  

*Default test ranges listed. Additional test settings are noted in the tech bulletin TB-3034

**The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.

Downloads:

• Combo Tester X3 - Installation, Operation and Maintenance