Measurement

Replacement Coiled Ground CordTo be used with the 19442 Digital Static Field Meter Made in the United States of AmericaThis item is made and stocked in Chino, CA Downloads: Static Sensor and Air Ionizer Test Kit Operation and Maintenance

Analog Compliance Verification Surface Resistance CheckerUsed for determining if a surface is dissipative, conductive or insulative Automatic Test Range Voltage Selection Per Compliance Verification ESD TR53Starts tests at 10 volts and automatically...

Shielded test leads for Analog Surface Resistance Meter Each cable is 5ft long Made in the United States of America Downloads: Analog Surface Resistance Test Kit Operation and Maintenance

Analog Compliance Verification Surface Resistance CheckerUse to test worksurfaces, shelving, carts, garments, chairs to ANSI/ESD S20.20 per ESD TR53 Automatic Test Range Voltage Selection Per Compliance Verification ESD TR53Starts tests at 10 volts and...

Economical Compliance Verification Surface Resistance CheckerUsed for determining if a surface is dissipative, conductive, or insulative Color Coded LEDsQuickly provides exponent range for quick checks of EPA ESD control items Automatic Test Range...

Handheld Meter for Measuring Offset Voltage and Discharge Times of Air IonizersUsed for the periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53. Timer for Decay Rates from ±1000V to ±100V Measures ionizers’ ability to neutralize both...

Ionization Verification Kit for Measuring Offset Voltage and Discharge TimesUse to measure performance specifications of ionizers in the actual area of use. Electrostatic Field MeterMeasures static charge and polarity on objects up to ±19.99 kV at a...

Electrostatic Field MeterMeasures static charge and polarity on objects up to ±19.99 kV at a distance of 1 inch Chopper-Stabilized SensorYields accurate measurements in both normal and ionized environments Dissipative Enclosure with 7 mm Ground...

Body voltage verification meterMeasures voltage (Human Body Voltage – HBV) on a person in combination with ESD footwear and flooring materials (both pre and post installation) according to IEC 61340-4-5 and ANSI/ESD STM97.2 Nominal and graphed...

Battery Powered Two-Point Resistance ProbeMeasures surface resistance of small samples or dedicated areas of large samples Gold Plated, Spring-Loaded Pins with Conductive Rubber ElectrodesMaintains consistent contact with small and/or non-flat...

Replacement Pins (1 Pair) To be used with the 19297 Two-Point Resistance Probe Made in the United States of America This item is made and stocked in Chino, CA Downloads: Two-Point Resistance Probe - Installation, Operation and Maintenance

Constant Area and Force Electrode (CAFE) for Gloves and Finger CotsMeasures electrical resistance per ANSI/ESD SP15.1 and includes one resistor-free wrist cord Compatible with the Following Desco Surface Resistance Meters 19290 Digital Surface...