Category 6a 10g M12 IP67 8 Position X code Double Shielded SF/UTP Industrial Outdoor High Flex Cable, M12 M to RJ45 F, CMX TPE, TEAL, 1.0m

L-com’s TRG625-T6T-1M is a Category 6a 10gig premium cable that allows you to plug a normal network cable with RJ45 connectors into an M12 cable. This cable is terminated with an M12 8-position (pole) X-code male to a standard 8x8 RJ45 female connector. The X-code M12 connector of the cable is IP67-rated when properly mated to protect against liquids and particulate, and their secure, threaded design makes them extremely resistant to accidental disconnects. This premium cable has a foil-shielded (SF/UTP) aluminum polyester braid design for protection from EMI and RFI noise. The industrial outdoor high flex premium TRG625-T6T-1M cord from L-com can withstand an operating temperature range of up to -40 to 68 degrees C.

This cable is flex tested to 1 million cycles at 10x cable OD and 10 million cycles at 20x cable OD. This X-code cable has a 0.5Amp maximum total current and a 48Vrms maximum operating voltage. The contact base of the cable connector is made from gold-plated phosphor bronze material. The industrial outdoor high flex cord has a teal FR-TPE (Flame-Retardant Thermoplastic Elastomer) jacket of 0.275 in.

diameter that is UV-resistant, weld spatter and the cable is rated for 300V with a CMX burn rating. This 1-meter-long cable is built with 26AWG stranded conductors for flexibility. L-com’s TRG625-T6T-1M round Ethernet M12 cable has a 4 twisted pairs and 8 strands. This twisted pair double shielded cord is suitable for I/O connectivity, test equipment, industrial Ethernet, EtherCat or Profinet, industrial control and factory automation, and sensor and actuator applications.

Features

• X-code M12 connector is IP67 rated when properly mated to protect against liquids and particulate plus their secure, threaded design makes them extremely resistant to accidental disconnects
• Cable is flex tested to 1 million cycles at 10x cable OD and 10 million cycles at 20x cable OD
• Double shielded braid + foil design for maximum protection from EMI/RFI; X-code assemblies are rated to Category 6a or up to 10gigabit throughout
• Industrial Outdoor FR-TPE (Flame-Retardant Thermoplastic Elastomer) cable jacket is resistant to oil, sunlight (UV), weld spatter and the cable is rated for 300V with a CMX burn rating
• This cable is terminated with an M12 4 position (pole) D-code plug (male) to a standard 8x8 RJ45 jack (female)

Application

• I/O connectivity
• Industrial control and factory automation
• Industrial Ethernet, EtherCat or Profinet
• Sensor and actuators
• Test equipment

Downloads:

• 2D Drawing (.pdf)